|
Menu |
Prof /
DescreseauCaractéristique des unités du réseau SANDActive sitesobsand-cosmolab present
LPRad-1-omm
nohup observe -i ph -a sun -d 60 &
90 0 90 0 sky 100
# localconfig file for sand # please be shure to put a line for the observation command without any comments. nohup observe -i ph -a sun -d 60 & powerusbport 1 # powerusb outlet to which CCD is connected powerusbversion 32 # can be 32 of 64 depending on CPU arch cammodel1 none # Observatory and ambient brightness monitoring cam. Can be linksys d link IPVideo9100A or none cammodel2 none # Sky monitoring cam. Can be linksys dlink IPVideo9100A raspberry-pi or none cam2pwrusbport 1 # powerusb outlet to which sky cam is connected darkness_threshold 100 # darkness level threshold for cam1 mountmodel none # mount model. Can be LXD-75 , PT785S+Pololu or none Longitude-W 71 7 33 # longitude of the observation site Latitude-N 45 25 23 # latitude of the observation site elev_sealevel 592 # site altitude relative to sea level (m) Site_name Cosmolab # name of the observation site sand-2-omm
nohup observe -a ast &
El_deg El_min Az_deg Az_min Im_typ In_tim 90 0 0 90 0 0 sky 14400 90 0 0 90 0 0 dark 14400
# localconfig file for sand # please be shure to put a line for the observation command without any comments. nohup observe -a ast & powerusbport 1 # powerusb outlet to which CCD is connected powerusbversion 32 # can be 32 of 64 depending on CPU arch cammodel1 linksys # Observatory and ambient brightness monitoring cam. Can be linksys dli nk IPVideo9100A or none cammodel2 none # Sky monitoring cam. Can be linksys dlink IPVideo9100A or none cam2pwrusbport 1 # powerusb outlet to which sky cam is connected darkness_threshold 128 # darkness level threshold for cam1 mountmodel none # mount model. Can be LXD-75 , PT785S+Pololu or none elev_gain 10.32 # servo_pos = gain * angle(deg) + offset elev_offset 5990 # elev_channel 1 # pololu channel to which elevation servo motor is connected azim_gain -10.167 # servo_pos = gain * angle(deg) + offset azim_offset 7660 # azim_channel 0 # pololu channel to which azimuth servo motor is connected Longitude-W 71 7 33 # longitude of the observation site Latitude-N 45 25 23 # latitude of the observation site Site_name Cosmolab # name of the observation site spectral_calib spectral-calib-SAND-2_OMM-2011.txt # name of the spectral calibration file (to be located in /home/sand/sv n/trunk/Calib_files) photometric_calib photometric-calib-SAND-2_OMM.txt # name of the photometric calibration file (to be located in /home/sand /svn/trunk/Calib_files) Universidad Complutense de Madrid presentDept. Astrofisica, Fac CC Fisicas, Madrid (Spain)
nohup observe -a sun -d 45 &
El_deg El_min Az_deg Az_min Im_typ In_tim 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 sky 300 90 0 0 90 0 0 dark 300
# localconfig file for sand # please be shure to put a line for the observation command without any comments. nohup observe -a sun -d 45 & powerusbport 2 # powerusb outlet to which CCD is connected powerusbversion 32 # can be 32 of 64 depending on CPU arch cammodel1 dlink # Observatory and ambient brightness monitoring cam . Can be linksys dli nk IPVideo9100A or none cammodel2 IPVideo9100A # Sky monitoring cam. Can be linksys dlink IPVideo9 100A or none cam2pwrusbport 1 # powerusb outlet to which sky cam is connected darkness_threshold 128 # darkness level threshold for cam1 mountmodel PT785S+Pololu # mount model. Can be LXD-75 , PT785S+Pololu or non e elev_gain 10.32 # servo_pos = gain * angle(deg) + offset elev_offset 5990 # elev_channel 1 # pololu channel to which elevation servo motor is connected azim_gain -10.167 # servo_pos = gain * angle(deg) + offset azim_offset 7660 # azim_channel 0 # pololu channel to which azimuth servo motor is co nnected Longitude-W 03 43 34 # longitude of the observation site Latitude-N 40 27 04 # latitude of the observation site elev_sealevel # site altitude relative to sea level (m) Site_name Observatorio-UCM # name of the observation site spectral_calib spectral-calib-OBSAND-4A-06-01-2015.txt # name of the spectral calibration file (to be loca ted in /home/sand/sv n/trunk/Calib_files) photometric_calib photometric-calib-SAND-4A-05-01-2015.txt # name of the photometric calibration file (to be l ocated in /home/sand /svn/trunk/Calib_files) Montsec Cataluna, Spain present
nohup observe -i sp -a sun -d 15 &
El_deg El_min Az_deg Az_min Im_typ In_tim 90 0 0 90 0 0 dark 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200 90 0 0 90 0 0 sky 7200
# localconfig file for sand # please be shure to put a line for the observation command without any comments. nohup observe -a sun -d 15 & powerusbport 3 # powerusb outlet to which CCD is connect ed powerusbversion 32 # can be 32 of 64 depending on CPU arch cammodel1 dlink # Observatory and ambient brightness moni toring cam. Can be linksys dli nk IPVideo9100A or none cammodel2 IPVideo9100A # Sky monitoring cam. Can be linksys dlin k IPVideo9100A or none cam2pwrusbport 2 # powerusb outlet to which sky cam is con nected darkness_threshold 128 # darkness level threshold for cam1 mountmodel PT785S+Pololu # mount model. Can be LXD-75 , PT785S+Pol olu or none elev_gain 10.32 # servo_pos = gain * angle(deg) + offset elev_offset 5990 # elev_channel 1 # pololu channel to which elevation servo motor is connected azim_gain -10.167 # servo_pos = gain * angle(deg) + offset azim_offset 7660 # azim_channel 0 # pololu channel to which azimuth servo m otor is connected Longitude-W 359 15 50 # longitude of the observation site Latitude-N 42 01 28 # latitude of the observation site elev_sealevel 800 # site altitude relative to sea level Site_name Montsec-COU # name of the observation site spectral_calib spectral-calib-OBSAND-4B-06-01-2015.txt # name of the spectral calibration file (to be located in /home/sand/sv n/trunk/Calib_files) photometric_calib photometric-calib-SAND-4B-05-01-2015.txt # name of the photometric calibration fil e (to be located in /home/sand /svn/trunk/Calib_files) Universitat de Barcelona, Barcelona Spain present
Dome @ Saint-Camille, Québec, Canada present
Old sitesUniversity of Hong Kong
Longitude-W 245 51 36 Latitude-N 22 16 59 Site_name HKU El_deg El_min Az_deg Az_min Im_typ In_tim 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 dark 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600 90 0 0 0 sky 600
nohup observe -a sun -d 60 & obsand-udes moved to Hefei, China on 2012/2/22
obsand-hefei moved to University of Hong Kong on May 23 2016
|
